Bushmaster 1.0 with Swing Away Tire Carrier
Model: 1st Generation Tacoma • Model Years: 1996-2004
The Bushmaster 1.0 rear bumper is specifically designed to be our premium offering for the 1st gen Toyota Tacoma rear bumper. Cutting the lower quarter panel is required to install the bushmaster 1.0
Product typically ships in 3 to 4 weeks depending on options and availability.
Trail PROVEN, Adventure READY
The Bushmaster 1.0 rear bumper is specifically designed to be our premium offering for the 1st gen Toyota Tacoma rear bumper. With the Bushmaster 1.0 you get a greatly improved departure angle, the strength of an unbreakable bumper, added side panel protection, and the looks to make all your buddies jealous! One benefit of the Bushmaster 1.0 is it is a lightweight option for full bumper and quarter panel protection. Finally, a rear bumper with uncompromised strength and durability to withstand your harshest abuse, and recovery points to get you out of those tight situations.
The Bushmaster 1.0 comes standard with the receiver hitch built in behind the license plate. This bumper can also be purchased without a receiver so that the factory receiver hitch can be utilized to maintain tow ratings. Cutting the lower quarter panel is required to install the bushmaster 1.0
Powder coat/Bare Metal Option: We offer the bumper in two standard finishes… Bare metal or powder coated. The bare metal option is for those who want to either paint or finish the bumper themselves or those who are looking to have a body shop color match the bumper to the body paint color.
Those who want CBI to finish the bumper will choose the powder coating option. We offer our bumpers in a standard powder coat color called Black Magic. This color is a satin black, smooth finish coating. Please keep in mind that while a powder coated finish is very durable, it is still susceptible to scratching, wear, chipping, and fading just like any other paint.
A CBI Offroad swing away tire carrier can be added to each CBI rear bumper. The swing away tire carrier is a great option for those looking to carry their oversized spare tire, along with other off-road accessories. CBI offers a standard swing away tire carrier design that allows the spare tire to be mounted along with a hi-lift jack mount, jerry can holder mount, CB antenna/whip tab, and a license plate mount (Toyota 4runner models only). The following additional accessories can be added.
Single/Double Jerry Can Holder: CBI offers as standard on each swing away a place to mount one of our jerry can holders. We offer a single jerry can holder that holds one, 5-gallon jerry can. (fits nato, scepter, carb, and other style cans) We also offer a double jerry can holder that will carry two, 5 gallon jerry cans. (fits nato, scepter, carb, and other styles cans) Each can holder has a locking feature to use a padlock to lock the cans into the holder. The can holder also has mounting points for QuickFist Clamps and CBI shovel and Ax mounts.
Shovel Mount: CBI Offers a lockable shovel mount that attaches to the side of our single or double can holder. This mount is designed to be solid and rattle free. The can carrier is designed to allow for both a shovel and ax mount to be attached at the same time… one on each side of the can holder.
Ax Mount: CBI Offers a lockable ax mount that attaches to the side of our single or double can holder. This mount is designed to be solid and rattle free. The can carrier is designed to allow for both a shovel and ax mount to be attached at the same time… one on each side of the can holder.
Fold down camp table: CBI offers a fold down camp table that can be added as an accessory to the swing away tire carrier. This table is 12” X 28” in size and is made of steel and powder coated. It also has dimple-died holes on the face to give it rigid strength and support.
Camp light: CBI offers a camp light option that can be mounted on the swing away tire carrier. The camp light option is a telescopic pole that can be raised up and down and pointed in any direction in 360 degrees. The mounting point offers mounting for all types of lights including LED lighting.
Each Bushmaster 1.0 rear bumper is hand built here in the U.S.A. by the best, skilled fabricators in the country. Attention to detail is very important in the design and function of this bumper.
- Bumper mounts directly to frame rails
- ¼” Mounting Brackets
- 3/16” Steel Plate Construction
- Fully MIG Welded
- (2) ¾” D-ring Tabs
- Built with receiver hitch behind license plate (This is standard)
- Built without receiver hitch (You can utilize the factory receiver hitch you already have)
- Includes all needed mounting hardware
- Hinged license plate mount
- Utilizes factory license plate lights
- Bumper weight: 105lbs
- Bare Metal Finish
- Optional Powder Coat Finish
- Ability to Customize
Bushmaster 1.0 rear bumpers will fit Toyota Tacoma trucks from model year 1996 to 2004.
*Bumpers built by CBI Offroad Fab are built for off-road use and for this end use were they designed and engineered. Tow ratings and associated liabilities are not the responsibility of CBI Offroad Fab and will be left up to the discretion of the purchasing customer.
The Bushmaster 1.0 rear bumper requires basic hand tools to install. Cutting of the body panels is required to install this bumper. It bolts to the frame of the truck. This bumper can be installed without professional help.
Estimated Installation Time: 1 hour
All bumpers built by CBI Offroad are designed to fit your vehicle with precision. Due to the individual nature of each vehicle and how it was manufactured there may be slight differences from one vehicle to another that cause fitment issues… these issues are outside of the control of CBI Offroad and how they anticipated the product to fit. These differences may also be caused by vehicle damage or modification. If any of the above occasions should arise additional modification and installation may be necessary to fit your bumper. Should you have any questions please contact CBI.