ICON VEHICLE DYNAMICS 07-18 JEEP JK 1.75-4" STAGE 1 COILOVER CONVERSION SYSTEM - Free Shipping on orders over $100 - Venture Overland Company
Click to zoom in
  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Buy Now, Pay Later

    Klarna Payments

  • Free Shipping

    On Orders Over $100

ICON VEHICLE DYNAMICS 07-18 JEEP JK 1.75-4" STAGE 1 COILOVER CONVERSION SYSTEM

Many in stock
$6,289.92
ICON VEHICLE DYNAMICS 07-18 JEEP JK 1.75-4" STAGE 1 COILOVER CONVERSION SYSTEM OVERVIEW Available as an industry first is the...
$6,289.92

customers are viewing this product
ICON VEHICLE DYNAMICS 07-18 JEEP JK 1.75-4" STAGE 1 COILOVER CONVERSION SYSTEM

ICON VEHICLE DYNAMICS 07-18 JEEP JK 1.75-4" STAGE 1 COILOVER CONVERSION SYSTEM

OVERVIEW

Available as an industry first is the ICON Jeep JK 1.75 – 4” bolt-on Stage 1 Coilover conversion system. This system not only offers superior ride quality and performance but gives you the option to adjust ride height based on how your vehicle is equipped. Included in this system are fabricated front Coilover upper & lower mounts, rear upper subframe & lower axle mounts, reservoir mount, 2.0 V.S. Series remote reservoir coilovers, front and rear adjustable track bars, front and rear link arms, and necessary hardware for proper installation. This ICON system was designed from the ground up for improved suspension handling off-road, increased wheel travel over stock, and the best ride quality on the market. The adjustable track bar with FK bearings not only improves rigidity over flexible factory joints, but offers the adjustability to center the axles under the Jeep. ICON 2.0 V.S. Series shocks include FK bearings, billet top cap & rod ends, 7/8" shafts, all while increasing the duration of consistent damping over stock regardless of the situation. Adjustable ride height, optional compression damping control valve, and secondary spring rate engagement adjustability by the end-user makes this kit highly tunable to your personal liking by all skill levels. The ICON JK hydraulic bump stop kit (22019) is also an option that can be installed with the Coilover conversion kit adding wheel control for high-speed traversing.

FEATURES & BENEFITS

  • 100% Returnable to stock
  • Adjustable ride height from 1.75 - 4" lift
  • Adjustable secondary spring rate engagement
  • Adjustable track bars with PTFE lined FK bearings
  • Upgraded tubular steel link arms with adjustability front and rear
  • Increased wheel travel overstock
  • Vehicle specific tuned shocks for superior performance
  • Shock geometry improves stability
  • Sheet metal front shock mount for maximum clearance & clean look
  • Lifetime guarantee that coil springs won’t sag

DOWNLOAD INSTALLATION GUIDE

TECH INFO:

  • OEM Wheels & Tires Fitment: Yes
  • Recommended Aftermarket Wheels: ICON Alloys | 17x8.5 w/ 4.50" or 4.75” BS / -6mm or 0mm Offset
  • Recommended Aftermarket Tires: 33" x 12.50" (Larger 35" tire packages will fit with minor modifications or aftermarket high clearance fenders, test fitment recommended)
  • APPLICATION NOTE #55: SHOCKS ARE FULLY SERVICEABLE. COILOVER HEIGHTS INDICATED ARE FOR A STOCK EQUIPPED VEHICLE
  • APPLICATION NOTE #60: THE ICON JK COILOVER KIT WAS DESIGNED AROUND A STOCK EQUIPPED JK WITH STANDARD AFTERMARKET REAR BUMPER / TIRE CARRIER. IN ORDER TO KEEP THIS KIT 100% BOLT ON THE REAR COILOVERS ARE STEEPLY ANGLED REARWARD. TO WORK CORRECTLY AND REDUCE BOTTOM OUT, A DUAL RATE SPRING SYSTEM IS INCORPORATED USING SECONDARY NUTS ON THE SHOCK CYLINDER TO ENGAGE THE BOTTOM SPRING RATE AS THE SHOCK ANGLE INCREASES. IF TOO MUCH PRELOAD IS ADDED, THE SECONDARY NUTS WILL NOT ENGAGE PROPERLY RESULTING IN DECREASED LOAD CARRYING ABILITY AND A LARGER RATE LOWER SPRING MAY BE REQUIRED TO ACCOMMODATE THE VEHICLES WEIGHT.
  • APPLICATION NOTE #62: FRONT DRIVESHAFT CAN HIT CERTAIN MODEL SKID PLATES AT FULL DROOP AND MAY NEED TO BE TRIMMED FOR FULL ARTICULATION
  • APPLICATION NOTE #63: 2012-UP JK MODELS REQUIRE THE USE OF ICON PART #22011 EXHAUST EXTENSION SPACER OR AFTERMARKET DRIVESHAFT PART #22014
  • APPLICATION NOTE #65: COILOVER BRACKETS / SHOCKS NOT SOLD SEPARATELY, ONLY SOLD IN COMPLETE KIT FORM AS LISTED.
  • APPLICATION NOTE #70: MUFFLER WILL NEED TO BE LOCATED FORWARD OF THE REAR AXLE AND A TURNDOWN PIPE INSTALLED OR THE PIPE ROUTED OUT OF THE BACK OF THE JEEP.
  • APPLICATION NOTE #85: ADVERTISED LIFT HEIGHT RANGES ARE FOR A STOCK EQUIPPED JK. INCREASING WEIGHT OF VEHICLE DUE TO ACCESSORIES WILL ALTER LIFT RANGE.
  • APPLICATION NOTE #86: REAR COILOVER CONVERSION REDUCES LOAD CARRYING CAPACITY. TOWING IS NOT RECOMMENDED.
  • Ships In Multiple Boxes

SYSTEM COMPONENTS:

 

  • 21025 (QTY: 1) | 21020/21025 BUSHING & SLEEVE SERVICE KIT
  • 21046 (QTY: 1) | 07-18 JK REAR UPPER FIXED LINK KIT
  • 22003 (QTY: 1) | 07-18 JEEP JK 3" STAGE 3 SUSPENSION SYSTEM
  • 21020 (QTY: 1) | 07-18 JK FRONT ADJ TRACK BAR KIT
  • 21041 (QTY: 1) | 07-18 JK REAR LOWER ADJ LINK KIT
  • 28006 (QTY: 1) | 07-18 JK 1.75-4" FRONT 2.0 VS RR COILOVER KIT
  • 22004 (QTY: 1) | 07-18 0-3" JK REAR COILOVER CONVERSION KIT
  • 21031 (QTY: 1) | 07-18 JK FRONT LOWER FIXED LINK KIT
  • 28007 (QTY: 1) | 07-18 JK 2-3" REAR 2.0 VS RR COILOVER KIT
  • 21036 (QTY: 1) | 07-18 JK FRONT UPPER ADJ LINK KIT


ICON VEHICLE DYNAMICS 07-18 JEEP JK 1.75-4" STAGE 1 COILOVER CONVERSION SYSTEM

Read More
Read Less
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Your cart

×