Outback 1.0 with Swing Away Tire Carrier

Model: 1st Generation Tacoma •  Model Years: 1996-2004


The Outback 1.0 rear bumper is specifically designed to be our premium offering for the 1st gen Toyota Tacoma rear bumper.

The product typically ships in 3 to 4 weeks depending on options and availability.
Trail PROVEN, Adventure READY

Despriction



The Toyota Tacoma is built to be off-road! For that reason, we have developed the best off-road bumpers you can get to outfit your Toyota Tacoma for the Trail.

The benefit of the Outback 1.0 is that you do not need to cut the quarter panel of your truck to mount it up and it is a lightweight option for full bumper and quarter panel protection. Finally, a rear bumper with uncompromised strength and durability to withstand your harshest abuse, and recovery points to get you out of those tight situations.

The Outback 1.0 comes standard with the receiver hitch built in behind the license plate. This bumper can also be purchased without a receiver so that the factory receiver hitch can be utilized to maintain tow ratings.

Options

Powder coat/Bare Metal Option: We offer the bumper in two standard finishes… Bare metal or powder coated. The bare metal option is for those who want to either paint or finish the bumper themselves or those who are looking to have a body shop color match the bumper to the body paint color.

 

Those who want CBI to finish the bumper will choose the powder coating option. We offer our bumpers in a standard powder coat color called Black Magic. This color is a satin black, smooth finish coating. Please keep in mind that while a powder-coated finish is very durable, it is still susceptible to scratching, wear, chipping, and fading just like any other paint.

 

Single/Double Jerry Can Holder: CBI offers as standard on each swing away a place to mount one of our jerry can holders. We offer a single jerry can holder that holds one, 5-gallon jerry can. (fits nato, scepter, carb, and other style cans) We also offer a double jerry can holder that will carry two, 5-gallon jerry cans. (fits nato, scepter, carb, and other styles cans) Each can holder has a locking feature to use a padlock to lock the cans into the holder. The can holder also has mounting points for QuickFist Clamps and CBI shovel and Ax mounts.

 

Shovel Mount: CBI Offers a lockable shovel mount that attaches to the side of our single or double can holder. This mount is designed to be solid and rattle free. The can carrier is designed to allow for both a shovel and ax mount to be attached at the same time… one on each side of the can holder.

 

Ax Mount: CBI Offers a lockable ax mount that attaches to the side of our single or double can holder. This mount is designed to be solid and rattle free. The can carrier is designed to allow for both a shovel and ax mount to be attached at the same time… one on each side of the can holder.

 

Fold down camp table: CBI offers a fold-down camp table that can be added as an accessory to the swing away tire carrier. This table is 12” X 28” in size and is made of steel and powder coated. It also has dimple-died holes on the face to give it rigid strength and support.

 

Camp light: CBI offers a camp light option that can be mounted on the swing away tire carrier. The camp light option is a telescopic pole that can be raised up and down and pointed in any direction in 360 degrees. The mounting point offers mounting for all types of lights including LED lighting.

 

Details



Each Outback 1.0 rear bumper is hand built here in the U.S.A. by the best, skilled fabricators in the country. Attention to detail is very important in the design and function of this bumper.


• Bumper mounts directly to frame rails
• ¼” Mounting Brackets
• 3/16” Steel Plate Construction
• Fully MIG Welded
• (2) ¾” D-ring Tabs
• Built with receiver hitch behind license plate (This is standard)
• Built without receiver hitch (You can utilize the factory receiver hitch you already have)
• Includes all needed mounting hardware
• Hinged license plate mount
• Utilizes factory license plate lights
• Bumper weight: 105lbs
• Bare Metal Finish
• Optional Powder Coat Finish
• Ability to Customize

Outback 1.0 rear bumpers will fit Toyota Tacoma trucks from model year 1996 to 2004.
*Bumpers built by CBI Offroad Fab are built for off-road use and for this end use were they designed and engineered. Tow ratings and associated liabilities are not the responsibility of CBI Offroad Fab and will be left up to the discretion of the purchasing customer.

Installation



The Outback 1.0 rear bumper requires basic hand tools to install. There is NO CUTTING or DRILLING to install this bumper. It bolts to the frame of the truck. This bumper can be installed without professional help. (PRINTABLE INSTALLATION INSTRUCTIONS)

Estimated Installation Time: 1 hour

*All bumpers built by CBI Offroad are designed to fit your vehicle with precision. Due to the individual nature of each vehicle and how it was manufactured there may be slight differences from one vehicle to another that cause fitment issues… these issues are outside of the control of CBI Offroad and how they anticipated the product to fit. These differences may also be caused by vehicle damage or modification. If any of the above occasions should arise additional modification and installation may be necessary to fit your bumper. Should you have any questions please contact CBI.

 

Outback 1.0 with Swing Away Tire Carrier

$1,449.99
Outback 1.0 with Swing Away Tire Carrier Outback 1.0 with Swing Away Tire Carrier Outback 1.0 with Swing Away Tire Carrier Outback 1.0 with Swing Away Tire Carrier
Outback 1.0 with Swing Away Tire Carrier Outback 1.0 with Swing Away Tire Carrier Outback 1.0 with Swing Away Tire Carrier Outback 1.0 with Swing Away Tire Carrier

Outback 1.0 with Swing Away Tire Carrier

$1,449.99
Fuel Can Holder
Powder Coating
Swing Away Accessories
$1,449.99

Model: 1st Generation Tacoma •  Model Years: 1996-2004


The Outback 1.0 rear bumper is specifically designed to be our premium offering for the 1st gen Toyota Tacoma rear bumper.

The product typically ships in 3 to 4 weeks depending on options and availability.
Trail PROVEN, Adventure READY

Despriction



The Toyota Tacoma is built to be off-road! For that reason, we have developed the best off-road bumpers you can get to outfit your Toyota Tacoma for the Trail.

The benefit of the Outback 1.0 is that you do not need to cut the quarter panel of your truck to mount it up and it is a lightweight option for full bumper and quarter panel protection. Finally, a rear bumper with uncompromised strength and durability to withstand your harshest abuse, and recovery points to get you out of those tight situations.

The Outback 1.0 comes standard with the receiver hitch built in behind the license plate. This bumper can also be purchased without a receiver so that the factory receiver hitch can be utilized to maintain tow ratings.

Options

Powder coat/Bare Metal Option: We offer the bumper in two standard finishes… Bare metal or powder coated. The bare metal option is for those who want to either paint or finish the bumper themselves or those who are looking to have a body shop color match the bumper to the body paint color.

 

Those who want CBI to finish the bumper will choose the powder coating option. We offer our bumpers in a standard powder coat color called Black Magic. This color is a satin black, smooth finish coating. Please keep in mind that while a powder-coated finish is very durable, it is still susceptible to scratching, wear, chipping, and fading just like any other paint.

 

Single/Double Jerry Can Holder: CBI offers as standard on each swing away a place to mount one of our jerry can holders. We offer a single jerry can holder that holds one, 5-gallon jerry can. (fits nato, scepter, carb, and other style cans) We also offer a double jerry can holder that will carry two, 5-gallon jerry cans. (fits nato, scepter, carb, and other styles cans) Each can holder has a locking feature to use a padlock to lock the cans into the holder. The can holder also has mounting points for QuickFist Clamps and CBI shovel and Ax mounts.

 

Shovel Mount: CBI Offers a lockable shovel mount that attaches to the side of our single or double can holder. This mount is designed to be solid and rattle free. The can carrier is designed to allow for both a shovel and ax mount to be attached at the same time… one on each side of the can holder.

 

Ax Mount: CBI Offers a lockable ax mount that attaches to the side of our single or double can holder. This mount is designed to be solid and rattle free. The can carrier is designed to allow for both a shovel and ax mount to be attached at the same time… one on each side of the can holder.

 

Fold down camp table: CBI offers a fold-down camp table that can be added as an accessory to the swing away tire carrier. This table is 12” X 28” in size and is made of steel and powder coated. It also has dimple-died holes on the face to give it rigid strength and support.

 

Camp light: CBI offers a camp light option that can be mounted on the swing away tire carrier. The camp light option is a telescopic pole that can be raised up and down and pointed in any direction in 360 degrees. The mounting point offers mounting for all types of lights including LED lighting.

 

Details



Each Outback 1.0 rear bumper is hand built here in the U.S.A. by the best, skilled fabricators in the country. Attention to detail is very important in the design and function of this bumper.


• Bumper mounts directly to frame rails
• ¼” Mounting Brackets
• 3/16” Steel Plate Construction
• Fully MIG Welded
• (2) ¾” D-ring Tabs
• Built with receiver hitch behind license plate (This is standard)
• Built without receiver hitch (You can utilize the factory receiver hitch you already have)
• Includes all needed mounting hardware
• Hinged license plate mount
• Utilizes factory license plate lights
• Bumper weight: 105lbs
• Bare Metal Finish
• Optional Powder Coat Finish
• Ability to Customize

Outback 1.0 rear bumpers will fit Toyota Tacoma trucks from model year 1996 to 2004.
*Bumpers built by CBI Offroad Fab are built for off-road use and for this end use were they designed and engineered. Tow ratings and associated liabilities are not the responsibility of CBI Offroad Fab and will be left up to the discretion of the purchasing customer.

Installation



The Outback 1.0 rear bumper requires basic hand tools to install. There is NO CUTTING or DRILLING to install this bumper. It bolts to the frame of the truck. This bumper can be installed without professional help. (PRINTABLE INSTALLATION INSTRUCTIONS)

Estimated Installation Time: 1 hour

*All bumpers built by CBI Offroad are designed to fit your vehicle with precision. Due to the individual nature of each vehicle and how it was manufactured there may be slight differences from one vehicle to another that cause fitment issues… these issues are outside of the control of CBI Offroad and how they anticipated the product to fit. These differences may also be caused by vehicle damage or modification. If any of the above occasions should arise additional modification and installation may be necessary to fit your bumper. Should you have any questions please contact CBI.