ReadyLIFT 6" MAX3.3 Suspension System - 2019-2024 Ram 1500

The ReadyLIFT 6" MAX3.3 Suspension System (part 42-19640) lifts the 2019-2024 Ram 1500 6 inches using Falcon 3.3 Fast Adjust front struts and rear piggyback shocks. ReadyLIFT pairs them with DOM tube steel upper control arms that correct ball joint angles, so the truck works for daily driving, trail use, and towing.

Part number: ReadyLIFT 42-19640

Key features

• 6" lift engineered around Falcon 3.3 series front struts and rear adjustable piggyback shocks
• Falcon 3.3 Fast Adjust dampers with a 3-position knob (Soft, Custom, Firm) and an 8-position Micro Adjust dial
• Hard-anodized large-bore 6061-T6 aluminum shock bodies with a reservoir design for consistent damping
• VOD (Volume Optimized Damping) digressive piston and Red Line high-VI shock oil
• DOM tube steel upper control arms with a heavy-duty high-angle ball joint
• Heavy-duty cast iron knuckles and fabricated steel components from 3/16" and 1/4" plate
• Full-coverage differential skid plate made from 3/16" steel plate
• Longer rear sway bar end links

What's included

• Front cross member and rear cross member
• Driver and passenger knuckles
• Rear coil springs
• Falcon 3.3 front coilovers (left and right) and Falcon 3.3 rear dampers (left and right)
• Ram 1500 upper control arm kit
• Component kit and hardware pack

Fitment

• 2019-2024 Ram 1500 (current generation)
• Not compatible with air suspension models or the Ram TRX
• Not compatible with the 3.0L twin-turbo Hurricane inline-six (some late-2024 models)
• Trucks with factory 22" wheels need a larger-bore knuckle setup: ReadyLIFT says to use #44-1961 or install replacement standard wheel bearing assemblies (not included)
• On Off-Road Group Package trucks, ReadyLIFT recommends skipping the front preload spacer

Tire fitment

• Recommended max with no trimming: 37x12.50 on a 20x9 wheel with 0 offset
• Max with trimming: 37x12.50 on a 20x10 wheel with -18 offset (trim front valance, front and rear felt liner edges, and mud flap)
• Not for use with 18" wheels
• ReadyLIFT bases its wheel and tire recommendations on specific wheel and tire brands, and sizes vary by manufacturer, so test-fit every wheel and tire combination before installation.

Install notes

• Estimated installation time: 12 hours +/- 1 hour (excludes alignment and wheel/tire assembly).
• Read the instructions completely before starting. ReadyLIFT recommends installation by a certified mechanic.

Questions about fitment? Email [email protected] with your year, make, model, and trim before ordering.