ReadyLIFT Premium 3.5" SST 3.3 Series Lift Kit - 2021-2026 Ford Bronco

The ReadyLIFT Premium 3.5" SST 3.3 Series Lift Kit (part 62-21360) for the 2021-2026 Ford Bronco pairs ReadyLIFT and Falcon engineering. It replaces key suspension and steering parts with Falcon 3.3 Fast Adjust coilovers, billet aluminum upper control arms, adjustable rear lower control arms and an adjustable rear track bar for better on-road comfort and off-road capability.

Part number: ReadyLIFT 62-21360

Key features

• 3.5" of lift with room for 37x12.50 tires on 17x8.5 wheels
• Falcon 3.3 Series Fast Adjust piggyback coilovers with a quick-adjust Soft-to-Firm knob and 8-position fine-tune adjustment
• Internal hydraulic bump stops front and rear; sealed gimbal-lock mount bearings
• CNC-machined 6061 aluminum billet upper control arms with forged chromoly rod ends, Teflon-lined bushings, on-car adjustability and HD high-angle ball joints
• Adjustable heavy-duty DOM rear lower control arms with Terrain Control Technology flex joints
• Adjustable rear track bar and heavy-duty rear track bar axle bracket to correct roll center
• Crowfoot wrench included for UCA adjustment

What's included

• Falcon 3.3 front and rear coilover kits
• Left and right billet upper control arms
• Left and right rear lower control arms
• Rear track bar and premium rear track bar bracket kit
• Rear brake line brackets and rear ABS bracket
• 1-1/4" crowfoot wrench (3/8" drive)
• Hardware pack

Fitment

• 2021-2026 Ford Bronco
• Not for Bronco Sport or Bronco Raptor
• Not tested by ReadyLIFT on the Bronco Big Bend with the stock 2" suspension lift; other requirements may apply

Tire fitment

• 37x12.50 tires on 17x8.5 wheels with +18mm offset
• 38x12.50 maximum with trimming on 17x8.5 wheels with +18mm offset
• 37x12.50 works at ride height but may contact the front body mount and rear inner fender through full travel and lock-to-lock steering; those areas must be addressed for full clearance
• ReadyLIFT bases its wheel and tire recommendations on specific wheel and tire brands, and sizes vary by manufacturer, so test-fit every wheel and tire combination before installation.

Install notes

• Estimated installation time: 6 hours +/- 1 hour (excludes alignment and wheel/tire assembly).
• Read the instructions completely before starting. ReadyLIFT recommends installation by a certified mechanic.

Questions about fitment? Email [email protected] with your year, make, model, and trim before ordering.