Toyota Prado 150 (2010-Current) Slimsport Roof Rack Kit

Toyota Prado 150 (2010-Current) Slimsport Roof Rack Kit

• Depth (mm): 225
• Length (mm): 330
• Width (mm): 1700
• Depth (in): 8.9
• Length (in): 13
• Width (in): 66.9
• Weight (kg): 32
• Weight (lb): 70.5
• Narration: Pump up your Toyota Prado 150’s gear-carrying capacity with this super-sleek Slimsport rack. Thanks to the rack’s T-slot system, you can add any of our wide range of top-mounted rack accessories. This rack is quiet thanks to its aerodynamic design and rubber edge trim.
• Specification: KSTP001T - Toyota Prado 150 (2010-Current) Slimsport Roof Rack Kit 
   
  Consisting of:
  1x KSLG001 - Lexus GX 460 Slimsport Tray
  1x RRAC274 - Lexus GX 460 (03-Cur) Slimsport Rack Wind Fairing
  1x RRAC971 - Protection Strip
   
  Material Used:
  Black epoxy powder - coated T6 aluminium
  High strength steelAssembled Rack Kit Dimensions:2080mm (81.9'') L x 1188mm (46.8'') W x 137mm (5.4'') H
   
  Approximate Installed Weight: 34.49kg (76.04lbs)
   
  The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
   
  To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4''-2.8'') to the highest point of your roof.
   
  Shipping Dimensions:
  Width: 330mm (13'')
  Length: 1700mm (67'')
  Height: 225mm (9'')
   
  Shipping Weight:
  Weight: 32kg (70lbs)

This low-profile flat deck Slimsport rack has a load-carrying area of 2080mm (81.9'') x 1188mm (46.8'').
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. It installs easily with no drilling required.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the RRAC182 for most Front Runner side mount accessories (sold separately).
The included standard full fairing with rubber edge trim makes the rack ultra-quiet
Need a lightbar? The optional lightbar fairing RRAC276 (sold separately) has a 40'' cutout to allow the use of LIGH213 (sold separately).
Fitment guide and all mounting hardware included.
RRAC213 is required for installation.
Note: Under Rack Tables are not compatible with the Slimsport rack kit range
Note: Some side mount accessories are not suited for low profile foot rails such as JADA010 and RRAC103.